Sewing Patterns & Supplies

janome sewing machine repairs

Sewing Machines - What Types Are Available?

Choosing the best machine for your needs can be a tedious task because there are so many models available. Luckily, they fall within three general types, and knowing which type you need will make your search for the right one much easier.

1) Mechanical Sewing Machines

These sewing machines are controlled by a rotary wheel. Any adjustment, such as the tension or the length, or width of the stitch, is done by simply moving a dial.

Consider these as no-frills machines that can support your most basic sewing needs. They are also relatively cheap, making them ideal for beginners, which is why manufacturers still produce them in huge numbers.

If you want a quality mechanical sewing machine, then consider the Janome Magnolia 7318. It is the perfect machine for simple quilting, crafting and garment repairs.

2) Electronic Sewing Machines

A lot of sewing enthusiasts oft for electronic sewing machines because they can create more in terms of stitches and patterns. The most useful thing about an electronic sewing machine is that there are particular functions that can be carried out just by pushing a button.

An electrical impulse shoots the needle up and returns it back to place in a sequence matched by the feeding mechanism which pushes the material through the sewing machine. It really makes the whole process a lot faster.

The Singer 7442 model is the most popular electronic sewing machines. This sewing machine comes with 30 built-in stitches and hundreds of functions, push-button controls, adjustable stitch width and length, reverse stitching, one-step buttonholer, needle threader, snap-on presser feet, free arm and LED light.

3) Computerized Sewing Machines

With the use of technology and modern innovations in recent years, sewing machines have become more and more complex and functional, with the addition of a built in computer now being more than just a novelty.

This can really mean hands off sewing, as you simply need to type in instructions, and then press a button or two. A sequence of stitches can be pre-programmed, so you do not have to replicate the exact same movements over and over again.

The Brother Quattro 600D is an ideal computerized sewing machine for sewing enthusiasts. It does not matter whether you are into embroidery, sewing, quilting or crafting, it machine will never fail you.

So, before randomly searching for a new sewing machine, you should first spend a few minutes writing down what tasks you will mainly be doing with it, and what special features, if any, you expect it to provide. Then, take that list, and compare it to the points set out above, and evaluate which type of sewing machine is most suitable for your needs.

As a final point, remember to find and read reviews on sewing machines that interest you before going and making a purchase. Reviews on independent websites are best as they do not have a vested interested in any particular sewing machine, and so will give you honest, unbiased information and advice. Online sewing forums are also a good source of information, advice and reviews.

About the Author

Learn more about Bernina Sewing Machines or read all our sewing machine reviews at http://www.BestSewingMachineDeals.com

janome 8000 sewing and embroidery machine for parts or repair not working $200.00

Most likely the machine was threaded improperly or the seam started improperly or you're using the incorrect needle size and type. -- timing problems are actually fairly rare in my experience, and often heralded by loud noises and broken needles. Dismantle the mess and pull out the bobbin and then compare what you're seeing during a stitch cycle to this:
http://sewusa.com/Sewing_Machine_Repair/Sewing Machine Hook Timing.htm Timing is something typically not set by the user-- if you really want to try, I recommend getting someone to teach you. No, specific repair manuals for end users are not available for most machines.

What needle size and point style, thread type and size and fabric were you sewing? How many layers of fabric?

Here's proper threading and seam starting:
I'll bet the back looks like the ones in these two albums:
http://www.picturetrail.com/sfx/album/vi… or http://www.picturetrail.com/sfx/album/vi… and you'd like to get it to look like: http://www.picturetrail.com/sfx/album/vi…
(red thread in the bobbin, blue thread on top).

Those are samples of the exact same sewing machine and I didn't do a thing to any of the adjustments. The first mess, with the tangles of thread on the back, I did by not getting the top thread into the upper tension *and* I didn't hang on to the thread tails when I started the seam. The second sample was solely not getting the thread into the upper tension.

So here's what you're going to do to fix your machine, after you take all the thread off of/out of the machine, and give it a quick brushup because there's probably some bits of stray thread caught in the bobbin case area by now.

A) Raise the presser foot lever. This automagically opens the top tension disks so you can get the thread between them when you thread the machine.
B) Rethread from scratch, top and bottom.
C) If you'e been playing with the upper tension setting, set it back to 4* -- that's pretty typical for most stitches, most fabrics.
D) Fetch up the bobbin thread and pull the bobbin thread and the top thread behind and under the presser foot, and leave 4-6" as tails.
*usually, if you have to set the tension lighter than 3 or heavier than 5 to get good stitching, something's odd... misthreading, thread wrong for the needle size, odd fabric, unusual technique, machine needs cleaning.

Now you're ready to start the seam:
1) With the needle fully raised AND the thread uptake lever (the thing that rises and falls and hits you in the eyebrow if you get too close) also fully raised, place your fabric under the needle. (Some machines automagically leave the needle and thread uptake lever up, others you have to use the handwheel to raise them.)
2) Use the handwheel (or foot control on some machines) to lower the needle into the starting position on the fabric.
3) Drop the presser foot.
4) Hold the tails of the thread behind the presser foot while you take a couple of stitches.
5) Drop the thread tails and sew normally, using both hands to guide.

You're going to do A through D every time you thread your machine.

You're going to do 1 through 5 every time you start a seam.

janome 8000 sewing and embroidery machine for parts or repair not working $200.00